How To Use Nail Gun with Air Compressor?

There is a wide range of nail guns available on the internet today that has made us trapped in a situation where it is becoming more and more challenging to decide what to choose. Right? Nil guns operated by air compressors are more powerful and provide better performance than electrically operated ones. They speed up the work and will help increase the efficiency.

At the building site, the combination of air compressor and nail gun exposes its real colors. The pneumatic nail gun is still one of the most effective, affordable, and important equipment in their arsenal as a portable solution for frames, floor coverings, and roof coverings. Let’s discuss how to use a nail gun with an air compressor with a proper step-wise method.

Read More : How to Load Staple Gun

How to Use Nail Gun with Air Compressor:

Step Wise Explanation

Step #1: choosing the right type of nail gun

There are many different kinds of nail guns present in the market right now. Before initiating, move towards a very important step: selecting the type of nail gun associated with the project you are working on. Below mentioned are some types of nail guns.

Framing Nailer

A nail gun may be the way to go for larger projects like repairing your patio or building that old tool shed. It employs 2.8 mm nails that you may install without breaking or damaging the plaster on top of the wood.

Finish Nailer

Finish nail guns are great for fixing ancient furniture and other home improvement projects since they use larger nail sizes (15-16 gauge). You can use them on a variety of surfaces, including wood.

Brad Nailer

Brad nail guns employ little nail heads (18-23 gauge) and are ideal for fastening small objects, such as a bedside table or children’s toys because the screw heads aren’t too huge or apparent.

Step #2: choosing the right type of nails

Nails in nail guns are frequently held together with wire, paper, or even a dab of glue. The heat from the pistol separates the nail from the bracket and forces it into the ground when it is fired. When the glue has cooled and solidified, nails with adhesive sit much better on the surface. Round nails (or D-shape nails) are required for most home remodeling projects and other home improvement projects (clipped nail clips).

The major difference is that nail guns can handle 20 to 30 percent more clipped nails than round-headed nails due to their shape. Another distinction is that clipped nails are usually bound with paper, but round nails are frequently bound with plastic. Your choice will be influenced by your personal preferences as well as the types of nails available in your area.

Step #3: choosing the right type of Compressor

You can use gas or electricity to power compressors. Electric compressors are better for home usage because they don’t produce any gas or smoke. Compressors can be either mobile or cable operated. It all depends on the kind of job you’ll be doing with it. If you’re using it on nail guns, any model will suffice, but if you’re traveling and need to top up the puncture with the same Compressor, a portable model is ideal.

Choose the air compressor you want to use. It’s now only a matter of connecting it to a power source. Connect one end of the airline to the nail gun and the other end to the Compressor if it isn’t already attached. If not, you’ll have to do it yourself.

Step #4: Operation

Turn on your air compressor and wait for the tank pressure to rise. A personal air compressor has a pressure range of 100 to 110 PSI. Depending on how deep you want to hit the nails, adjust the pressure. Attempting to get the nails in place with completely immersed nails necessitates greater pressure. Take cautious not to exceed the Compressor’s pressure limit.

The nail gun’s nozzle sits entirely against the surface and shoots to drive the nail down. This reduces the risk of nails ricocheting off the surface and injuring the person who is using them.

Step #5: Disconnect the Nail gun

Last but not least, you must disconnect the nail gun. Treat the nail gun as charged even if it isn’t if you’re confident the air compressor isn’t turned off.

When you’re finished, don’t switch off the Compressor right away. To lessen the pressure, use the regulator to lower it gradually. When you reach the limit, please turn it off, then open the safety valve to discharge the remaining air. Allow any residual air to escape by closing the compressor drain valve.


We hope the details mentioned in this post are enough for you to have a better understanding. You can further search for ‘what size air compressor do I need for nail gun.’ Make sure to choose the right type of equipment for your project to succeed in whatever task you are associated with.

Thomas Oscar

Hey, I am Thomas Oscar founder and author of Machinery Judge.
View All Articles

Leave a Reply

Your email address will not be published. Required fields are marked *