Stucco is formed by mixing up Portland cement, lime, water, and sand. It is used to coat walls and form the outermost layers of residential and commercial structures. Nowadays, stucco is formed by different polymerizing compounds that add to the flexibility and resistance of stucco coating.
Stucco is the outermost layer of the wall, and mostly it is used for the decoration of the walls. Whenever the need to drill holes in the walls arises, the first layer that comes in contact with the drilling bit is the stucco coating. The problem in drilling stucco is that whenever force is applied to its layer, its small pieces fall off due to the vibration of the drilling bit.
In this regard, it is considered quite difficult to drill into the stucco coating. If you are facing the same problem and you want to know how to drill into stucco without cracking, there is a piece of good news for you. There is a way of safely drilling into stucco coating without damaging the coating. In this article, we will put your heads together about in detail “How to drill in stucco?” to get help if you are facing the same problem.
Precautionary Measures before Drilling Into Stucco
Before drilling into stucco, you need to make sure that you take care of the following preventive measures to avoid any damage.
1. Look If The Stucco Is Damaged:
First of all, ensure that the surface of the stucco you are working on is intact and that there is no damage to the surface.
Whereas, if you see signs of damage, you need to repair the damage first because drilling on stucco, even with small damage, can cause more damage to the surface. It would help if you had stucco caulk to repair the damage. Just spread the caulk all over the damaged surface and make the surface look neater. Then let the caulk dry for at least 3 hours. After that, you are good to go.
2. Precautions for Hanging Things Onto Stucco Surfaces:
If you want to drill a hole to hang things onto the surface of your stucco, you need to make sure you know about these things mentioned below. Firstly, you should consider the weight of the things to be hanged. If you want to hang lightweight things such as key holders and small pictures, you need adhesive hooks.
These hooks will not damage the surface, and you can easily hang your keys or pictures. Whereas, if you want to hang some heavy things, you need to drill the surface and use screw hooks. These screw hooks will provide a strong grip on your objects and not damage the stucco surface.
Steps Involved In Drilling In Stucco
Step#1: Get Your Gear
You will require a drill with brickwork chomped an anchor, a screw, and a measuring tape and pencil.
Step#2: Mark The Opening
Utilize the measuring tape to decide precisely where you need to bore. Assuming you are hanging something like an image, get someone to hold the image set up. At the same time, you take estimations and guarantee that you mark the necessary openings perfectly placed on the divider.
Step#3: Get The Piece
You will need to utilize a brickwork touch, and it ought to be the right size bit. Assuming you utilize a too huge piece, the screw won’t hold. Assuming it’s excessively little, you will attempt to drive the screw into place, which will probably cause harm. While picking a little, measure it against the screw, assuming you’re screwing straightforwardly into the Plaster or the anchor that you will use to secure the screw.
Step#4: Drill Consistently
Guarantee that you drill on a level plane into the divider or in an upward direction into the roof, and ensure that you don’t wobble the piece around a lot while penetrating. This development will enlarge the opening, and you will be left with too enormous an opening for your anchor.
Step#5: Embed the Anchor
Apply a little caulk in the opening, on the off chance that you wish, and add the anchor before screwing the screw. Screw it in close, yet don’t make a difference in a lot of strain.
Drill Bit and screws needed for Stucco
Many people wonder what kind of drill bit is needed for stucco. The answer is you need a masonry bit for stucco, and you can get it from a stucco drill bit at Home Depot easily. These drill bits come in different sizes, so you need to buy the right size according to your requirements. Also, you need to make sure you use the concrete screws on stucco as most of the properties of stucco and concrete are common.
How to Nail Into Stucco
Many people are also confused about how to nail into stucco? The answer is the same as the screws; you need a hard nail, such as a concrete nail, if you want to nail something into the stucco. It is better to drill the stucco first to avoid any cracks and damage to the surface.
How to Drill into Stucco- Frequently Asked Questions:
Q1. Can you use a regular drill for stucco?
Ans. Yes, you can drill into stucco without the requirement of any fancy type of drilling equipment. A regular drill works just as fine in drilling the hole. But make sure you follow the correct procedure to avoid damage to the surface.
Q2. Can I screw a screw into the stucco?
Ans. Yes, you can screw a screw into the stucco. You need a concrete screw if your want to use screws. It is better to use a drill bit to drill holes before screwing because it reduces the possibility of damage to the stucco surface.
Q3. Can I use a hammer to nail it into the stucco?
Ans. Yes, hammering a nail into stucco is possible. Make sure you are using a concrete nail, but it can cause damage to the surface due to force exertions. You can drill a hole before using nails to avoid this damage to the stucco layer.
Wrapping Up- Drilling into Stucco
Hence, above is a step-by-step guide on drilling into the stucco. We highly recommend using these steps, and you can do it yourself instead of calling professionals. However, if you are new to using these tools, don’t try to perform it yourself.
Also watch this complete video for more information!